Storage and maintenance of common fishing gear

Update:04-03-2012
Summary:

Fishing gear is widely used in fishery production. Its […]

Fishing gear is widely used in fishery production. Its correct use and maintenance are of great significance for reducing costs, improving economic benefits and extending the service life. In order to store fishing gear well, we should first understand the physical and chemical properties of various fishing gear. For example, some production units put the ethylene and nylon mesh in the open air for a long time, resulting in a decline in the strength of the mesh, reducing the service life of fishing gear, and often causing greater economic losses. Therefore, the following points should be paid attention to in the storage and maintenance of fishing gear:
(1) Before the storage of fishing gear, the dirt on the fishing gear, such as mud, fish grease and other attachments, shall be washed with fresh water, and then dried in the air. The floating, sinking and other accessories shall be removed and stored separately. Before the hooks are stored, they should be cleaned, sharpened, coated with anti rust oil, and then stored in a dry place.
(2) The storage area shall be kept ventilated and free from direct sunlight. For fishing gear with small quantity and volume, it can be tied and hung on the roof beam. The fishing gear with large quantity and volume shall be stored in a warehouse with high foundation and good ventilation conditions.
(3) Check frequently during storage. When the weather is sunny and the air is dry, open the doors and windows of the warehouse to let the air circulate. In case of rain or high temperature, the doors and windows of the warehouse shall be closed strictly and shall not be opened at will. Pay more attention to the warehouse in rainy season or hot summer season, because the net and net rope made of plant fiber are prone to mildew. Once it is sunny, they should be exposed to the sun immediately, and can be properly sprayed with fungicide when necessary. In the warehouse, we should also pay attention to the work of killing insects and rats.
(4) Although synthetic fibers have better corrosion resistance than plant fibers, some synthetic fibers, such as acrylic fiber and nylon fiber, will also produce mildew spots under high temperature and humidity for a long time, and the material strength will also be affected. Therefore, the fishing gear made of synthetic fiber should also be ventilated and dry. Most synthetic fibers lack good sunlight resistance. Do not expose fishing gear made of such materials to sunlight for a long time. Some synthetic fiber meshes should not be folded and bent too much to avoid affecting the strength of the wire and reducing the service life.
(5) During or after the operation, the fishing gear should be washed to remove debris, which is not only closely related to the fishing effect, but also important to the protection of fishing gear. If the sundries attached to the mesh are not removed, the mesh will be torn due to uneven stress during operation.

0
Views: 171

Cixi Huxinyi Fishing Tackle Fitting Factory